Warranty

 

Approved EU certificated test for anti-bulgur, sound resistance, weatherproof and fire resistance doors.

logos23

Doors have a 3 year warranty

Door components and lock of the door have a 12 month warranty.

PLEASE NOTE:
THIS ONLY APPLIES IF YOU ARE USING THIS RECOMMENDATION

Entrance door use and recommendation

  • We recommend, not to building doors which are located on the south or west sides of the building for them to avoid direct sun exposure to the front door panels.
  • Painted and stained doors are advisable in lighter shades, which are less exposed to solar radiation.
  • Exterior doors must be under a roof, to protect from the sun and direct rainwater runoff into the door frame.
  • We recommend, all installations of the doors within the facility should take place at a later stage if construction is in progress to reduce de-facing, door panel’s vulnerability.
  • When installing exterior doors in a construction site, it should be completed with increased moisture related construction works (concreting, plastering, filling, etc.).
  • In case of insufficient ventilation and high humidity inside the premises, inside the front door decorative panels there can be steam build up, they can accumulate moisture. (The manufacturer is not responsible for the rusting door hardware and interior panels deformation caused by inadequate ventilation inside the premises)

 

Operating rules

  1. Not allowed to place hard objects in door path while door is open.
  2. The door can be only completely locked when the door is fully closed.
  3. If the door frame installation requires any electrical work please refer to the electrical installation requirements.
  4. Not allowed to put any kind of solid object (except for designated key) in the key hole to operate the lock.
  5. Not allowed to pour any liquid into the keyhole.
  6. Existing internal premises cannot have humidity to be greater than 60%.
  7. Existing facilities must be ventilated.
  8. Existing facilities must not be high chemical activity.
  9. It is strictly prohibited to insert fingers between the door and frame.
  10. Door surfaces may be cleaned with a damp cloth without using gasoline, alcohol, or other active cleaners.
  11. It is strictly forbidden to close and push the door outwards that contains a locking latch lock.
  12. Periodically grease the lock handle which will control the trigger.

 

Armoured internal doors in use RULES

  1. Not allowed to place hard objects in door path while door is open.
  2. The door can be only completely locked when the door is fully closed
  3. If the door frame installation requires any electrical work please refer to the electrical installation requirements.
  4. Not allowed to put any kind of solid object (except for designated key) in the key hole to operate the lock.
  5. Not allowed to pour any liquid into the keyhole.
  6. Existing internal premises cannot have humidity to be greater than 60%.
  7. After cleaning door panels with a damp cloth you must wipe the surfaces with a dry cloth making sure there is no moisture on the panels.
  8. Existing facilities must not be high chemical activity.
  9. It is strictly prohibited to insert fingers between the door and frame.
  10. Clean Door surface with a damp cloth, without gasoline, alcohol, or other active cleaners.
  11. It is strictly forbidden to close and push the door outwards that contains a locking latch lock.
  12. Periodically grease the lock handle which will control the trigger.